When the heat gets unbearable, we all turn to our air conditioners for relief. Air conditioners transfer the heat from the inside of the property to the outside air at the push of a button. A malfunctioning air conditioner, however, fails to perform this role and is more of a bane than a boon. Many of us focus heavily on maintaining our air conditioners, often forgetting one basic thing; prepping the air conditioner and the area around it before switching it on. The good news is that you don’t have to be a rocket scientist to get the most out of your air conditioner. To help you get started, we in this post, take a look at some things you need to do before you switch on your air conditioner. Read on.

1. Clean the outside area

It’s common for debris to accumulate around the air conditioning unit during winter and fall. When summer starts knocking at your door, the first thing you need to do is clear at least 18 inches of area around your air conditioner. Get rid of twigs, leaves, and debris that can impact the unit’s performance. If you feel the unit has sucked in a considerable amount of dirt, now may be a good time to call an air conditioning company in Alpharetta.

2. Clean or replace the filter

The furnace filter is one of the most important components of your air conditioning unit. Furnace filters prevent air borne impurities from entering the interiors of the property. Before you turn on your air conditioner, remember to clean the filter using mild soap and water. If the filter looks too dirty consider replacing it.

3. Check your thermostat

To ensure thermostat readings are accurate, test the device thoroughly. Check the wiring and tighten the loose terminal screws. If you are using a traditional thermostat, consider replacing it with a programmable one.

4. Check outside and inside units

Use a mixture of soap and water to clean your outside units. If you find any cracks or leaks, contact an air conditioning company in Roswell immediately. Inspect your indoor units for damage. Note down your findings and hand it over to the air conditioning repair expert when they arrive at your location.

5. Check the refrigerant and drain line

To avoid property damage, make sure the drain line is clear and unobstructed. If you find it clogged, just flush in a cup of chlorine bleach and rinse it with water. Check the refrigerant line and make sure it is properly insulated. If you find any deviations from the accepted norm, call our heating repair experts at Central Heat & Air Conditioning and leave it to them to make sure your system is up and running in no time.

6. Unblock vents

Conduct a visual inspection of the vents, if you, like many property owners rearrange your draperies and furniture during winter. Make sure the vents are not blocked by draperies or furniture.

7. Check circuits and wirings

Before starting your air conditioner, make sure the circuit breakers are working. Inspect the wiring. Make sure it is not damaged or frayed. Instead of attempting to repair damaged cables, consider consulting an expert.


Before switching on your air conditioner, follow these tips. If you encounter any serious performance issues, remember, help is just a phone call away. Our experts at Central Heat & Air Conditioning are always on their toes and will react to your request swiftly. To register your request, call at 404-975-2917. Alternatively, fill out our contact form and someone from our team will contact you shortly.